Identification Of Parts - Carrier CDG-105EA Owner's Manual

IDENTIFICATION OF PARTS

Dryer mode(optional)
The unit can make the MAX dehumidification function
when it is under the Dryer mode. The fan speed is fixed
at high fan speed. The humidity level is automatically
controlled according to the actual room humidity.The unit
will quit dryer mode after a maximum 10 hours' operation.
NOTE:
The Dryer mode must be operated in a close room,do not
open the door and window.
To make the best effective dehumidification ,please first
dehydrate the wet clothes.
Make sure to direct airflow at the wet clothes (See Fig.A).
For thick and heavy wet clothes may not get the best
effective dehumidification.
CAUTION
Do not cover the air outlet of the unit with clothes. It may
cause excessive heat, fire or failure of unit.
Do not place the wet clothes on the top of the unit and do
not make the water drop into the unit. It may cause
electric shock,creepage or failure of unit.
Identification of par ts
Front
Control panel
1
2 Handle
Air outlet grille
3
Water bucket
4
5 Water level window
Rear
1
Drain hose outlet
2 Caster
3
Power Cord and plug
4
Air intake grille
5
Air filter (behind the grill)
NOTE: All the pictures in the manual are
for explanation purposes only. The actual
shape of the unit you purchased may be
slightly different, but the operations and
functions are the same.
30~50cm
30~50cm
Airflow
Allow 30~50cm of distance
on the top and right side of
the unit to the wet clothes.
Fig.A
3
4
5
1
2
3
6
Wet clothes
1
2
Fig.2
4
5
Fig.3