Programming Space Heating - Daikin EKHBRD011ADV17 Operation Manuals

Indoor unit for air to water heat pump system and options
Hide thumbs Also See for EKHBRD011ADV17:
Table of Contents

Advertisement

Programming space heating

5 sec
Operation manual
13
Programming space heating is carried out as follows:
NOTE
1
2
3
4
5
6
7
8
9
10 Use the
11 Use the
12 Repeat steps
13 Press the
5 sec
14 You automatically return to step 6, start again to program the
Returning to previous steps in the programming
procedure without saving modified settings is done by
pressing the
button.
Press the
button to enter the programming/consulting mode.
Select the operation mode you would like to program by means
of the
and
buttons.
The actual mode is blinking.
Press the
button to confirm the selected mode.
The actual day is blinking.
Select the day you would like to consult or to program by means
of the
and
buttons.
The selected day is blinking.
Press the
button to confirm the selected day.
Hold down the
button for 5 seconds to program the detailed
actions.
The first programmed action of the selected day appears.
Use the
button to select the action number you would like to
program or to modify.
Use the
and
buttons to set the correct action time.
Use the
and
temperature.
and
buttons to set the room temperature.
button to select:
-
: to switch heating and the remote controller off.
-
: to select automatic temperature calculation for leaving
water temperature
Use the
and
shift value (refer to
"Space heating operation ( )" on page 5
more information about weather dependent set point).
7
to
10
to program the other actions of the
selected day.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
button for 5 seconds to store the programmed
actions.
If the
button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 and 5 are deleted.
You automatically return to step 6.
By pressing the
button several times, you return to previous
steps in this procedure and finally return to normal operation.
following day.
Indoor unit for air to water heat pump system and options
buttons to set the leaving water
buttons to set the appropriate
EKHBRD011~016ADV17+Y17
4P402192-1B – 2017.09
for

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents