Programming And Consulting The Schedule Timer; Programming Space Heating - Daikin EKHBRD014AAV1 Operation Manual

Programming and consulting the schedule timer

Programming the schedule timer is flexible (you can add, remove or
alter programmed actions whenever required) and straightforward
(programming steps are limited to a minimum). However, before
programming the schedule timer, remind:
Familiarize yourself with the icons and the buttons. You will need
them when programming. Refer to
and icons" on page 3.
Fill out the form at the very end of this manual. This form can
help you define the required actions for each day. Keep in mind
that:
- In the space heating program, 5 actions can be programmed
per weekday. The same actions are repeated on a weekly
basis.
- In the domestic water heating and quiet mode program, 5
actions can be programmed per mode. The same actions are
repeated on a daily basis.
Take your time to enter all data accurately.
Try to program the actions in a chronological way: start with
action 1 for the first action and end with the highest number for
the last action. This is not a requirement but will simplify the
interpretation of the program later.
If 2 or more actions are programmed for the same day and at the
same time, only the action with the highest action number will be
executed.
Example:
Programmed actions
Time Temperature
(hour) (°C)
1 16:00 — 22
2 18:00 — OFF
3 08:00 — 23
4 06:00 — 21
5 18:00 — 26
You can always alter, add or remove the programmed actions
later.
EKHBRD011~016AAV1+Y1
Indoor unit for air to water heat pump system and options
4PW54466-1C
"Remote controller buttons
Executed actions
Time Temperature
(hour) (°C)
1 06:00 — 21
2 08:00 — 23
3 16:00 — 22
4 18:00 — OFF

Programming space heating

5 sec
5 sec
Operation manual
12