Table of Contents
Advertisement
Programming quiet mode or domestic water heating
Programming domestic water heating or quiet mode is carried out as
follows:
Returning to previous steps in the programming
NOTE
procedure without saving modified settings is done by
pressing the
1
Press the
button to enter the programming/consulting mode.
2
Select the operation mode you would like to program by means
of the
and
The actual mode is blinking.
3
Press the
button to confirm the selected mode.
4
Select the day you would like to program by means of the
and
buttons.
The actual day is blinking.
5
Press the
button to confirm the selected day.
6
Hold down the
button for 5 seconds to the program the
detailed actions
The first programmed action of the selected day appears.
7
Use the
button to select the action number you would like to
program or to modify.
8
Use the
and
9
Use the
button to select or deselect
10 Repeat steps
7
to
10
selected mode.
When all actions have been programmed, make sure that the
display shows the highest action number you would like to save.
EKHBRD011~016ADV17+Y17
Indoor unit for air to water heat pump system and options
4P402192-1B – 2017.09
button.
buttons.
buttons to set the correct action time.
as action.
to program the other actions of the
11 Press the
button for 5 seconds to store the programmed
actions.
If the
button is pressed when action number 3 is displayed,
actions 1, 2 and 3 are stored but 4 and 5 are deleted.
By pressing the
button several times, you return to previous
steps in this procedure and finally return to normal operation.
12 You automatically return to step 6, start again to program the
following day.
Consulting programmed actions
Consulting space heating, domestic water heating or quiet mode is
carried out as follows:
NOTE
Returning to previous steps in this procedure is done
by pressing the
1
Press the
button to enter the programming/consulting mode.
2
Select the operation mode you would like to consult by means of
the
and
buttons.
The actual mode is blinking.
3
Press the
button to confirm the selected mode.
The actual day is blinking.
4
Select the day you would like to consult by means of the
and
buttons.
The selected day is blinking.
5
Press the
button to confirm the selected day.
The first programmed action of the selected day appears.
6
Use the
and
programmed actions of that day.
This is called the readout mode. Empty program actions (e.g. 4
and 5) are not displayed.
By pressing the
button several times, you return to previous
steps in this procedure and finally return to normal operation.
button.
buttons to consult the other
Operation manual
14
Hide quick links:
Advertisement
Table of Contents
