Jura GIGA X3C Operating & Cleaning Instructions page 6

Weekly milk system clean
Complete this procedure once a week after the daily milk system clean
1. Remove the splash guard.
2. Remove spout cover. Press the black releasing buttons and lift.
3. Pull the milk outlet down
4. Remove the auto frother by pulling it towards you.
5. Separate the auto frother into 6 parts.
6. Soak all 6 parts in 250ml of warm water & 15ml of Cafetto red weekly solution (71145) for 20 min.
7. Remove the parts from solution and rinse under cold tap water.
8. Check that water flows through the milk outlet freely.
9. Re-assemble the auto frother ensuring the arrow tips line up.
10. Refit the auto frother, spout cover and splash guard.
Important:
The splash guard protects the coffee spout slide ribbon behind it from milk splatters and must be fitted
careful not to press on the coffee spout slide ribbon as it can be damaged.
Figure 1
Figure 6
My Coffee Shop Pty Ltd
ACN 102 850 037
clientservices@mycoffeeshop.com.au
(Fig 1)
(Fig 4) and the milk hose out.
(Fig 7)
Figure 2
Figure 7
(Fig 5)
(Fig 6)
(Fig 8)
Figure 3
Figure 8
1473-1475 Malvern Road
Glen Iris VIC 3146
ph: 03 9946 4160
fax: 02 9629 8046
1300 365 487
(Fig 2 – 3)
(Fig 9)
Figure 4
Figure 9
93/1-5 Harwood Street
www.mycoffeeshop.com.au
. Be
Figure 5
Pyrmont NSW 2009
ph: 02 9034 6580
fax: 02 9629 8046