STEP 3
This step may require the assistance of an
additional person.
Join the male and female connectors ends
that attach the console control wire to the
Base Frame (64). Slide the Upright Tube
(65) into the Base Frame (64), paying close
attention not to cut or pinch the control
wires. Secure both section members using
the Hex Bolts (18) provided.
STEP 4
Mount the Left Pedal (52) to the Left
Pedal Tube (71). Securing the two
members with the Screws (22) and Nuts
(20) provided. Repeat the same steps to
assemble the Right Pedal.
14