Table of Contents
Advertisement
To clear the user password, follow the same steps as in changing a user
password,
but press <Enter> when prompted to create/confirm the password. After you clear
the password, the User Password item on top of the screen shows Not Installed.
3.7
Save & Exit menu
The Save & Exit menu items allow you to load the optimal default values for the
BIOS items, and save or discard your changes to the BIOS items.
Save Changes and Reset
This option allows you to save the changes and exit the Setup program.
Discard Changes and Reset
This option allows you to reset your system without saving your changes. When
you select this option or if you press <Esc>, a confirmation window appears. Select
Yes to discard changes and exit.
Restore Defaults
This option allows you to load the default values for each of the parameters on the
Setup menus. When you select this option or if you press <F3>, a confirmation
window appears. Select Yes to load the default values.
Save as User Defaults
This option allows you to save the current changes as the user's default values.
Restore User Defaults
This option allows you to load the user's default values.
Launch EFI Shell from filesystem device
This item allows you to attempt to launch EFI Shell application (Shellx64.efi) from
one of the available fiesystem devices.
Chapter 3: BIOS setup
3-11
Advertisement
Table of Contents
