Table of Contents
Advertisement
11. Serial ATA 6.0Gb/s connector (7-pin SATA6G_1~SATA6G_4)
ThIS connector connects to Serial ATA 6.0 Gb/s hard disk drives via Serial
ATA 6.0 Gb/s signal cables.
EMB-Q87B SATA 6.0Gb/s connectors
NOTE: When using hot-plug and NCQ, set the SATA Mode Selection item in
the BIOS to [AHCI]. See section 3.3.6 SATA Configuration for details.
12. Minicard connectors
Use these connectors to connect a Minicard device.
EMB-Q87B Minicard connectors
NOTE: The Minicard device is purchased separately.
13.
SPI flash programmable connector (8-pin SPI_1)
Use this connector to flash BIOS SPI ROM.
EMB-Q87B SPI flash programmable connector
2-20
MINICARD2
MINICARD1
SPI_1
(NC)
(NC)
SPI_MOSI
SPI_MISO
SPI_CLK
SPI_CS#
GND
+3V_SPI
PIN 1
EMB-Q87B
Advertisement
Table of Contents
