4.2
Adjustment When Replacing a Part
Adjustment is necessary when replacing any of the following parts.
4.2.1
Setting of LED Head Drive Time
Note:
When the luminous intensity marking of the replacement LED head (new part) is same
as that of the removed LED head (old part), do not reset the LED head drive time.
•
Luminous Intensity Marking Label
Part Replaced
LED Head
Image Drum Cartridge
Main Control Board
Adjustment
Set the LED head drive time.
Reset the image drum counter
(refer to User's manual).
EEPROM data Upload / Download
ex.
If there is a "TH" marking, it
means about manufacturing
location of Thailand.
Last 3 digits represent the
LED head marking number.
Luminous intensity marking
4 - 4
027
ı
154