Oki OKIPAGE 10ex Maintenance Manual page 148

8) Interface Parameter Setting
The following settings are possible by pressing the ENTER key, after selecting the display
contents of the LCD of the operator panel by using the
Settings are retained even when the printer power is turned off.
By pressing the ON LINE key, menu setting mode is completed and the printer returns to on-
line state.
OFF-LINE
Ready
XXX
Keep the MENU key down for more than 2 seconds and bring the printer into menu setting
mode (level 2). Next, press the MENU key 10 times.
RS232C
Ready
SERIAL
FLOW CTL
Ready
Contents
XXX : PCL, AUTO, HEX DUMP, PRR or FX
"RS232C SERIAL" is displayed on the LCD.
Item
Contents of Display
DTR HI
DTR LO
XONXOFF
RBSTXON
Factory Setting: DTR HI
A - 3
and
Press the ENTER key.
Flow CTL
Function
SPACE-READY
MARK-READY
Sending at intervals of 1 sec.
keys.