3.3.17 Sensor Plate (Inlet)
(1) Remove the upper cover (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Press the clamps of three sensor plates (inlet and paper) 1, and remove them by pressing
them upward from the bottom.
1
1
Sensor plate (paper)
Sensor plate (inlet)
1
Sensor plate (inlet)
3 - 23