3.3.9
Eject Roller Assy
(1) Remove the upper cover assy (see 3.3.1).
(2) Remove the operator panel assy (see 3.3.4).
(3) Remove the face up stacker assy (see 3.3.8).
(4) Remove the lower base unit (see 3.3.5).
(5) Disengage the eject roller assy 1 from the lower base 2 by pressing the latch section of the
eject roller assy 1 in the direction of the arrow shown below, and remove the eject roller assy
1.
LATCH
1
2
3 - 15