Table of Contents
Advertisement
Signamax
•
Do not spill food or liquids on your system components,
and never operate the product in a wet environment. If the
system gets wet, see the appropriate section in your
troubleshooting guide or contact your trained service
provider.
•
Do not push any objects into the openings of your system.
Doing so can cause a fire or an electric shock by shorting
out interior components.
•
Use the product only with approved equipment.
•
Allow the product to cool before removing covers or
touching internal components.
•
Operate the product only from the type of external power
source indicated on the electrical ratings label. If you are
not sure of the type of power source required, consult your
service provider or local power company.
•
To help avoid damaging your system, be sure the voltage
selection switch (if provided) on the power supply is set to
match the power available at your location:
– 115 volts (V)/60 hertz (Hz) in most of North and South
America and some Far Eastern countries such as South
Korea and Taiwan
– 100 V/50 Hz in eastern Japan and 100 V/60 Hz in
western Japan
– 230 V/50 Hz in most of Europe, the Middle East, and the
Far East
•
Also be sure that attached devices are electrically rated to
operate with the power available in your location.
•
Use only approved power cable(s). If you have not been
provided with a power cable for your system or for any
AC-powered option intended for your system, purchase a
power cable that is approved for use in your country. The
power cable must be rated for the product and for the
voltage and current marked on the product's electrical
ratings label. The voltage and current rating of the cable
should be greater than the ratings marked on the product.
™
065-7930 16-Port Gigabit Ethernet Switch
viii
Advertisement
Table of Contents
