Table of Contents
Advertisement
Signamax
Protecting
Discharge
Static electricity can harm delicate components inside your system.
To prevent static damage, discharge static electricity from your
body before you touch any of the electronic components, such as
the microprocessor. You can do so by periodically touching an
unpainted metal surface on the chassis.
You can also take the following steps to prevent damage from
electrostatic discharge (ESD):
1. When unpacking a static-sensitive component from its
shipping carton, do not remove the component from the
antistatic packing material until you are ready to install the
component in your system. Just before unwrapping the
antistatic packaging, be sure to discharge static electricity
from your body.
2. When transporting a sensitive component, first place it in
an antistatic container or packaging.
3. Handle all sensitive components in a static-safe area. If
possible, use antistatic floor pads, workbench pads and an
antistatic grounding strap.
™
065-7930 16-Port Gigabit Ethernet Switch
Against
xii
Electrostatic
Advertisement
Table of Contents
