Table of Contents
Advertisement
Signamax
Before You Connect to the Network
The site where you install the Switch may greatly affect its
performance. Please follow these guidelines for setting up the
Switch.
•
Install the Switch on a sturdy, level surface that can
support at least 6.6 pounds (3 kg) of weight. Do not place
heavy objects on the Switch.
•
The power outlet should be within 6 feet (1.82 meters) of
the Switch.
•
Visually inspect the power cord and see that it is fully
plugged in and secured to the AC power port.
•
Make sure that the Switch is allowed proper heat
dissipation and adequate ventilation. Leave at least 4 inches
(10 cm) of space at the front and rear of the Switch for
ventilation.
•
Install the Switch in a fairly cool and dry place for the
acceptable temperature and humidity operating ranges.
•
Install
electromagnetic field generators (such as motors), vibration,
dust, and direct exposure to sunlight.
•
When installing the Switch on a level surface, attach the
rubber feet to the bottom of the device. The rubber feet
cushion the Switch, protect the casing from scratches and
prevent it from scratching other surfaces.
™
065-7930 16-Port Gigabit Ethernet Switch
the
Switch
in
a
site
22
free
from
strong
Advertisement
Table of Contents
