Signamax
Connecting The Switch
Switch To End Node
Switch To Hub or Switch
Connecting To Network Backbone or Server
Switch To End Node
End nodes include PCs, routers and other network devices outfitted
with a 10, 100 or 1000 Mbps RJ-45 Ethernet/Fast Ethernet/Gigabit
Ethernet ports.
An end node can be connected to the Switch via a twisted-pair
Category 3, 4, or 5 (or better) UTP/STP cable. The end node can be
connected to any of the ports of the Switch.
Switch connected to an end node
™
065-7930 16-Port Gigabit Ethernet Switch
NOTE: All sixteen (16) high-performance NWay
Ethernet ports can support both MDI-II and MDI-X
connections.
24