Toshiba 200CDT User Manual page 16

1.9 Power Supply
The power supply provides five kinds of voltages to the 200 series system board. The 200
series power supply has one microprocessor and it operates at 500 KHz. It contains the
following functions:
1. Determines if the AC cable or battery is connected to the computer.
2. Detects AC output and circuit malfunctions.
3. Controls the LED icon and speaker.
4. Turns the battery charging system on and off and detects a fully charged battery.
5. Determines if the power can be turned on and off.
6. Provides more accurate detection of a low battery.
7. Calculates the remaining battery capacity.
The power supply output rating is specified in Table 1-8.
Use for
System logic, FDD, HDD,
Display
CPU
Flash ROM, PC card
CPU, RAM, GA
VRAM, GA
1-16
Table 1-8 Power supply output rating
Name voltage
VCC
CPUV
12V
B3V
B5V
DC Regulation
tolerance
(%)
+5 ±5
+2.9 ±5
+12 ±5
+3.3 ±0.3V
+4.7 ±5
200 Series