Advertisement
4.3
Optional PC Card
Removing an Optional PC Card
To remove an optional PC card make sure the computer is in boot mode then follow the steps
below and refer to Figure 4-4.
1.
Turn off the power to the computer. Disconnect the AC power cord and all
external cables connected to the computer.
2.
Remove the battery pack as described in Section 4.2.
3.
Pull out the eject button and press it (the top button for the top card and the
bottom button for the bottom card). The card will pop out slightly for removal.
4-8
Figure 4-4 Removing the PC card
200 Series
Advertisement
