Setting Twain Driver - Kyocera TASKalfa 266ci Operation Manual

Preparation before Use > Installing Software

Setting TWAIN Driver

Register this machine to the TWAIN Driver.
1
2
Display the screen.
1
Select Start button of the Windows display, All Programs, Kyocera and then TWAIN
Driver Setting.
In Windows 8, select Search in charms, Apps, and then TWAIN Driver Setting.
2
Click Add.
Configure TWAIN Driver.
Network
1
4
2
3
6
5
7
USB
1
3
2
4
5
6
NOTE
When the machine's IP address is unknown, contact Administrator.
Enter the machine name.
Select this machine from the list.
Set units of measurement.
Enter the machine's IP address or host name.
When using SSL, select the checkbox beside SSL.
When user login administration is enabled
Select the checkbox beside Authentication,
and enter Login User Name (up to 64
characters) and Password (up to 64 characters).
When job accounting is enabled, select the
checkbox beside Account ID, and enter the
account ID as many as eight digits.
Enter the machine name.
Set units of measurement.
Select this machine from the list.
Set Image Compression and the Compression Level.
When user login administration is enabled
Select the checkbox beside Authentication,
and enter Login User Name (up to 64
characters) and Password (up to 64 characters).
When job accounting is enabled, select the
checkbox beside Account ID, and enter the
account ID as many as eight digits.
2-24