Accessing Command Center Rx - Kyocera TASKalfa 266ci Operation Manual

Preparation before Use > Command Center RX

Accessing Command Center RX

1
2
Display the screen.
1
Launch your Web browser.
2
In the address or location bar, enter the machine's IP address or the host name.
Examples: https://192.168.48.21/ (for IP address)
https://MFP001 (if the host name is "MFP001")
The web page displays basic information about the machine and Command Center RX as well
as their current status.
NOTE
If the screen "There is a problem with this website's security certificate." is displayed,
configure the certificate. For details on Certificates, refer to the Command Center RX User
Guide.
You can also continue the operation without configuring the certificate.
Configure the function.
Select a category from the navigation bar on the left of the screen. When you log in to the
machine as an administrator, you will see Device Settings, Function Settings,
Network Settings, Security Settings, and Management Settings.
2-31