Denon AVR-2113CI Owner's Manual page 123

Hide thumbs Also See for AVR-2113CI:
Table of Contents

Advertisement

Settings
Make settings for wired LAN.
Only set "Settings" when connecting to a network without a DHCP function.
Network
Information
IP Control
Friendly Name
q
Settings
Maintenance Mode
Selects how configure the network settings
q On the menu, select "Network" – "Settings" and press
ui
ENTER
w Use
to select "DHCP", then press
o p
ENTER
e Use
to select "Off", then press
ui
r Use
to select "IP Address", then press
• IP Address : Set the IP address within the ranges shown below.
The Network Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.1 – 10.255.255.254
CLASS B: 172.16.0.1 – 172.31.255.254
CLASS C: 192.168.0.1 – 192.168.255.254
uio p
t Use
to input the address and press
ui
y Use
to select the setting item, then press
• Subnet Mask : When connecting an xDSL modem or terminal adapter
directly to this unit, input the subnet mask indicated in the documentation
supplied by your provider. Normally input 255.255.255.0.
• Default Gateway : When connected to a gateway (router), input its IP
address.
• Primary DNS, Secondary DNS : If there is only one DNS address indicated in the documentation
supplied by your provider, input it at "Primary DNS". If there are two or more DNS addresses, input
the first one at "Secondary DNS".
o
BACK
u Press
or
.
The display returns to the original screen.
• When connecting to the network via a Proxy server, select "Proxy" and press
"Proxy settings").
DVD
Default settings are underlined.
Setting details
e
Network/Settings
w
DHCP
Off
IP Address
192.168.000.001
Subnet Mask
255.255.255.000
r
Default Gateway
255.255.255.000
Primary DNS
000.000.000.000
Secondary DNS
000.000.000.000
Proxy
Configure the network settings manually
ENTER
.
.
.
ENTER
.
ENTER
.
ENTER
.
ENTER
• If you are using a broadband router (DHCP function), there is no need to make the settings at "IP
Address" and "Proxy", since the DHCP function is set to "On" in this unit's default settings.
• If this unit is being used connected to a network without the DHCP function, the network settings
must be made. In this case, some knowledge of networks is required. For details, consult a network
administrator.
• If you cannot connect to the Internet, recheck the connections and settings (vpage 22).
t
• If you do not understand about Internet connection, contact your ISP (Internet Service Provider) or the
store from which you purchased your computer.
y
• When you want to cancel the setting during IP address input, press
(vpage 121
120
Setting details
o
BACK
or
.
v See overleaf
Network

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents