Denon AVR-2113CI Owner's Manual page 104

Setting items
Delay Time 0ms – 300ms (30ms)
Adjust the audio delay time
against video to extend the
sound field image. You can
set this when the sound
mode is "MATRIX".
Effect Level 1 – 15 (10)
Adjust the sound effect
Set to a lower level if the positioning and sense of phase of the
level. You can set this when
surround signals seems unnatural.
the sound mode is original
listening mode.
Small : Simulate acoustics of a small room.
Room Size
Determine size of acoustic Medium small : Simulate acoustics of a medium-small room.
environment. You can set Medium : Simulate acoustics of a medium room.
this when the sound mode Medium large : Simulate acoustics of a medium-large room.
is original listening mode. Large : Simulate acoustics of a large room.
NOTE
"Room Size" does not indicate the size of the room in which sources are
played.
Height Gain Low : Reduce the front height channel volume.
Control the front height Normal : Front height channel sound is output with standard sound
channel volume. volume.
High : Increase the front height channel volume.
NOTE
"Height Gain" is displayed for the following settings.
• When "Assign Mode" (vpage 115) is set to "Front Height".
• When the "Speaker Config." – "Front Height" setting (vpage 116) is
set other than to "None".
• When sound mode is "PLgz" or the PLgz decoder is used.
DVD
Setting details
101
Setting items
Set Defaults Yes : Reset to the defaults.
The "Surround Parameter" No : Do not reset to the defaults.
settings are returned to the
When you select "Set Defaults" and press
default settings.
ENTER
, the "Reset to the default values?"
prompt is displayed. Select either "Yes" or
"No", and press
Setting details
ENTER
.
Audio