Denon AVR-2113CI Owner's Manual page 111

Setting items
Resolution Auto : The number of pixels the TV connected to the HDMI MONITOR
Set the output resolution. OUT connector supports is detected automatically and the appropriate
You can set "Resolution" output resolution is set.
separately for HDMI output 480p/576p / 1080i / 720p / 1080p / 1080p:24Hz / 4K : Set the output
of the analog video input resolution.
and HDMI input.
• This item can be set when "i/p Scaler" is set to anything other than
CBL/SAT DVD
"Off".
Blu-ray z GAME z
• When "i/p Scaler" is set to "Analog & HDMI", the resolution of both the
MEDIA PLAYER z
AUX
analog video input signal and HDMI input signal can be set.
• To watch 1080p/24Hz pictures, use a TV that supports 1080p/24Hz video
CD NETWORK
signals.
TV AUDIO z
• When set to "1080p:24Hz", you can enjoy film-like pictures for film
sources (in 24 Hz). For video sources and mixed sources, we recommend
setting the resolution to "1080p".
• It is not possible to convert a 50 Hz signal into 1080p/24Hz. It is output
at a resolution of 1080p/50Hz.
Progressive Mode Auto : The video signal is automatically detected and the appropriate
Set an appropriate mode is set.
progressive conversion Video : Select mode suitable for video playback.
mode for the source video Video and Film : Select mode suitable for video and 30-frame film
signal. material playback.
This item can be set when "i/p Scaler" is set to anything other than
CBL/SAT DVD
"Off".
Blu-ray z GAME z
MEDIA PLAYER z
AUX
TV AUDIO z
CD
DVD
Setting details
108
Setting items
Aspect Ratio 16:9 : Output at 16:9 aspect ratio.
Set the aspect ratio for the 4:3 : Output at 4:3 aspect ratio.
video signals output to the
"Aspect Ratio" can be set when "i/p Scaler" is set to anything other
HDMI.
than "Off".
CBL/SAT DVD
Blu-ray z GAME z
MEDIA PLAYER z
AUX
CD NETWORK
TV AUDIO z
z "Blu-ray", "GAME", "MEDIA PLAYER", "CD" or "TV AUDIO" can be set when "HDMI" or "COMP"
(vpage 111, 112) has been assigned.
Volume Display
Sets where to display the master volume level.
Setting items
Volume Bottom : Display at the bottom.
Top : Display at the top.
Off : Turn display off.
When the master volume display is hard to see when superimposed
on movie subtitles, set to "Top".
Info Display
Displays status of operation temporarily when the sound mode is changed, or input source is switched.
You can set whether or not to show each of these status displays.
Setting items
On-screen Info On : Turn display on.
Off : Turn display off.
Video
Setting details
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details