Denon AVR-2113CI Owner's Manual page 110

Setting items
Standby Source Last : Enters standby with the previously used input source.
Sets the HDMI input source CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / CD : Enters
to put into standby when standby with each of the input sources assigned to each input terminal.
the power is on.
"Standby Source" can be set when "HDMI Control" is set to "On".
Power Off Control All : If power to a connected TV is turned off independently of the input
Links the power standby of source, power to this unit is automatically set to standby.
this unit to external devices. Video : If power to a connected TV is turned off when the input source
is Blu-ray / DVD / TV AUDIO / CBL/SAT / GAME / MEDIA PLAYER / AUX,
power to this unit is automatically set to standby.
Off : This unit does not link with power to a TV.
"Power Off Control" can be set when "HDMI Control" is set to "On".
Output Settings
Makes screen-related settings.
z "Blu-ray", "GAME", "MEDIA PLAYER", "CD" or "TV AUDIO" can be set when "HDMI" or "COMP"
(vpage 111, 112) has been assigned.
"Output Settings" can not be set when 4K signals are input.
Setting items
Video Mode Auto : Process video automatically based on the HDMI content
Make settings for video information.
processing. Game : Always process video for game content.
Movie : Always process video for movie content.
CBL/SAT DVD
Blu-ray z GAME z
• If "Video Mode" is set to "Auto", the mode is switched according to the
MEDIA PLAYER z
AUX
input contents.
TV AUDIO z
• If a source is played in both MAIN ZONE (audio and video) and ZONE2
CD
(audio only) modes in the same room, audio in MAIN ZONE and ZONE2
modes may sound out of synchronization, but this is not malfunction. In
this case, setting to "Game" mode may improve audio synchronization.
DVD
Setting details
Default settings are underlined.
Setting details
107
Setting items
Video Conversion On : The input video signal is converted.
The input video signal is Off : The input video signal is not converted.
converted automatically
in conjunction with
• When a non-standard video signal from a game machine or some other
the connected TV
source is input, the video conversion function might not operate. In this
(vpage 6 "Converting
case set "Video Conversion" to "Off".
input video signals for
• When "Video Conversion" is set to "Off", the video conversion function
output (Video conversion
does not work. In this case, connect this unit and TV with the same type
function)").
of cable.
CBL/SAT DVD
Blu-ray z GAME z
MEDIA PLAYER z
AUX
TV AUDIO z
CD
i/p Scaler Analog : Use i/p scaler function for analog video signal.
Convert the input source Analog & HDMI : Use i/p scaler function for analog and HDMI video signal.
resolution to the resolution HDMI : Use i/p scaler function for HDMI video signal.
set. Off : Do not use i/p scaler function.
CBL/SAT DVD
• "Analog & HDMI" can be set for input sources for which an HDMI input
Blu-ray z GAME z
connector is assigned.
MEDIA PLAYER z
AUX
• Which items can be set depend on the input source assigned to each
input connector.
CD NETWORK
• This function is not effective when the input signal is "x.v.Color", 3D,
TV AUDIO z
sYCC 601 color, Adobe RGB color, Adobe YCC 601 color or computer
resolution.
Video
Setting details
v See overleaf