Denon AVR-2113CI Owner's Manual page 116

Source Level
• This function corrects the playback level of the selected input source's audio input.
• Make this setting if there are differences in the input volume levels between the different sources.
–12dB – +12dB (0dB)
The analog input level and digital input level can be adjusted independently for input sources for
which "DIGITAL" is assigned at "Input Assign" (vpage 111).
Input Select
Set the audio input mode and decode mode of each input source.
The input modes available for selection may vary depending on the input source.
Setting items
Input Mode Auto : Automatically detect input signal and perform playback.
Set the audio input modes HDMI : Play only signals from HDMI input.
for the different input Digital : Play only signals from digital input.
sources. Analog : Play only signals from analog input.
It is normally recommended
to set the audio input mode
• "Digital" can be set for input sources for which "DIGITAL" is assigned
to "Auto".
at "Input Assign" (vpage 112).
• If the input source is set to "CBL/SAT", "DVD", "Blu-ray", "AUX" or
"CD", it can be set to "Analog".
• When digital signals are properly input, the
the display. If the
(vpage 112) and the connections.
• If "HDMI Control" is set to "On" and a TV compatible with the ARC is
connected via the HDMI MONITOR connectors, the input mode whose
input source is "TV" is fixed to ARC.
DVD
Default settings are underlined.
Setting details
Default settings are underlined.
Setting details
indicator lights on
indicator does not light, check "Input Assign"
Setting items
Decode Mode Auto : Detect type of digital input signal and decode and play automatically.
Set the audio decode mode PCM : Decode and play only PCM input signals.
for input source. DTS : Decode and play only DTS input signals.
CBL/SAT DVD
• This item can be set for input sources for which "DIGITAL" is assigned
Blu-ray GAME
at "Input Assign" (vpage 111).
AUX MEDIA PLAYER
• Normally set this mode to "Auto". Set "PCM" and "DTS" when
inputting the corresponding input signal.
CD TV AUDIO
Video Source
Video of another input source is played back combined with the playing audio.
Default : Play the picture and sound of the input source.
Blu-ray / DVD / TV AUDIO / CBL/SAT / GAME / MEDIA PLAYER / AUX : Select video input source to
view. The video of the selected input source is played along with the audio currently being played. This
can be set for individual input sources.
"Blu-ray", "GAME", "MEDIA PLAYER", "CD" or "TV AUDIO" can be selected only when "HDMI"
or "COMP" is assigned to the input source.
NOTE
• It is not possible to select HDMI input signals.
• Input sources for which "Hide" is selected at "Hide Sources" (vpage 112) cannot be selected.
113
Setting details
Default settings are underlined.
Setting details
Inputs