Starting The Washer; End Of Cycle - Dexter Laundry T750 EXPRESS Installation & Operation Instructions

After all mounting, plumbing and electrical work is completed, the washer should be run through
a cycle and checked for water leaks and proper functioning.

STARTING THE WASHER

A. Load the clothes into the cylinder and latch the door securely. Be sure clothing does
not get caught between the door gasket and tub front when closing the door. Maximum
load is 50 pounds clothes, dry weight. Do not load the washer with more than 50 lbs.
B. Select the appropriate cycle temperatures for the load being washed.
C. Add low sudsing powdered detergent into the "detergent" compartment of the
automatic dispenser on the top of the washer. If desired add fabric softener to the "fabric
softener" compartment. Use the amount of fabric softener as recommended by the
manufacturer.
If liquid wash products are used in the "detergent" compartment, they must be added at
the beginning of the wash cycle.
If the machine is set for pre-wash, washing products can be added to the round opening
of the dispenser or put in with the clothes when loading the washing machine.
D. Insert coins, tokens or debit card to meet the displayed vend price. Once the vend
price is met, the display will read "PUSH" and the start button LED will blink. If the
door is not closed and latched, the display will read "DOOR" and the control will wait
until the door is latched to continue. Pressing the start button will begin the cycle and
activate the ON light. The display will go blank for a moment and then display the cycle
time in minutes. The clothes door will lock and remain locked until the end of the cycle.

END OF CYCLE

When the cycle is complete the time will display "00" until the door is opened and a 5-second
tone will sound. The door can now be opened. Leave the clothes door open when the machine is
not in use.