Table of Contents
Advertisement
B-2 Installing the Operating System
System Update
If the system configuration is modified, always provide the system update by using NEC
EXPRESSBUILDER DVD shipped with the system. See Chapter 6 for details.
Installing on the Mirrored Volume (Windows Server 2008)
When re-installing the OS to a hard disk drive which has been upgraded to Dynamic Disk, only the
simple dynamic volume is available for installation.
If you want to install the OS on a volume that is mirrored using [Disk Management], invalidate the
mirroring and reset to the basic disk before the installation, and validate the mirroring again after the
installation.
You can create, invalidate, or delete the mirror volume by using [Disk Management] in [Computer
Management].
Re-installation to Dynamic Disk
When the system is Windows Server 2003 x64 Edition or Windows Server 2003
In the re-installation to the hard disk drive upgraded to a dynamic disk, one or more partitions other
than the partition in which OS is to be installed may exist and you may desire to leave the partitions.
If so, note the followings.
<Example>
As the partition in which OS will be installed, select the partition in which OS has been
installed previously.
Select "Use current file system as it is (no change)" for the format of the OS partition.
(C:)
XX.XX GB NTFS
Normal (System)
System
(D:)
XX.XX GB NTFS
Normal
Data area (when leaving this partition is desired.)
Advertisement
Table of Contents
