G-Series Touchpanel Interface
®
26
¥ Isys
G-Series Touchpanel Interface: TPS-G-TPI
Video Menu
The TPS-G-TPI can display two fully-scalable and movable, full motion video
windows, each supporting standard video, HDTV and high-resolution RGB signals
from external AV and computer sources. These units use auto-detect for composite,
S-video, component or RGBHV. They support SDTV (NTSC and PAL), EDTV,
HDTV and RGB (VGA) up to UXGA (1600 x 1200). Two video inputs provide for
connectivity to QuickMedia. You can perform Auto Detect by selecting QM Audio
1 or QM Audio 2 or manually choose Video, S-Video, Component or RGB as an
input source. Enable Black & White can also be selected for either video channel.
A table describing the video menu controls follows the illustrations.
Touching on the Video button on the SETUP MENU, will open the screen shown
below. From here, you can enter the setup screens for both Video 1 and Video 2 by
touching their respective buttons.
VIDEO SETUP
Refer to the following table for additional VIDEO SETUP MENU details.
®
Crestron Isys
TPS-G-TPI
Operations Guide – DOC. 6445