Operation And Important Riding Points; Starting And Warming Up A Cold Engine - Yamaha Fazer Owner's Manual

Colorprofile:GenericCMYKprinterprofile
CompositeDefaultscreen
WARNING
1. Before riding this Motorcycle,
become thoroughly familiar
with all operating controls and
their functions. Consult a
YAMAHA dealer regarding any
control or function that you do
not thoroughly understand.
2. Never start your engine or let it
run for any length of time in a
closed area. The exhaust fumes
are poisonous and can cause
l o s s o f c o n s c i o u s n e s s .
A l w a y s o p e r a t e
Motorcycle in an area with
adequate ventilation.
3. Before starting out, always be
sure the side stand is up.
Failure to retract the side stand
completely can result in a
serious accident when you try
to turn a corner.
CHAPT4_5_6.cdr
Saturday,October01,20051:02:21PM

OPERATION AND IMPORTANT RIDING POINTS

Starting and warming up a
cold engine
1. Turn the fuel cock to "ON"
2. Turn the main switch to "ON."
3. Shift the transmission into
neutral.
NOTE :
When the transmission is in neutral,
the neutral indicator light should be on.
If the light does not come on, ask a YMI
dealer to inspect it.
y o u r
4 Fully open the Starter Lever and
completely close the throttle grip.
5. Kick the kick starter to start the
engine.
6. After starting the Engine, turn back
the Starter Lever to the Warming-
up Position (About Half way)
5-1
3
7. After Warming-up the Engine,
turn off the Starter Lever
completely.
NOTE :
For better engine performance
always warm up the engine. before
take off. Never open throttle fully
when engine is cold, otherwise
engine tends to stop.
NOTE :
The engine is warm when it
responds normally to the throttle
with the Starter Lever in "OFF"
direction.