Connecting To The Lan Terminal; Connecting To The Rs-232C Terminal - JVC DLA-X970R Instructions Manual

Connecting via HDMI-DVI conversion cable
This Unit
To [HDMI 1] or [HDMI 2] input
terminal
HDMI-DVI Conversion Cable (Sold Separately)
.
If noise occurs, move the desktop PC away from this unit.
0
If the video is not displayed, try to reduce the length of the cable or lower the resolution of the video transmitting
0
equipment.

Connecting to the LAN Terminal

This Unit
To [LAN] Terminal
.
The network is used to control this unit. It is not used for sending or receiving video signals.
0
Please contact your network administrator for information concerning the network connection.
0
Set "ECO Mode" to "Off" if LAN communication is performed in the Standby mode. (P. 56)
0
For more information on control, please refer to "External Control"P. 67.
0

Connecting to the RS-232C Terminal

This Unit
To [RS-232C] Terminal
RS-232C Connection Cable (Sold Separately)
.
Set "ECO Mode" to "Off" if RS-232C communication is performed in the Standby mode. (P. 56)
0
For more information on control, please refer to "External Control"P. 67.
0
Connection Cable
(Sold Separately)
Desktop PC, etc.
Desktop PC, etc.
DVI Output Terminal
Network
Laptop, etc.
RS-232C Terminal
Hub
Server
19