Eco Mode; Network - JVC DLA-X970R Instructions Manual

ECO Mode

Setting
On
Off

Network

For specifying the settings for external control from a PC or smartphone.
Setting
DHCP Client On
Off
IP Address
Subnet Mask
Default Gateway
MAC Address
Set
Control4
Glossary of Network Terminology
DHCP
IP Address
Subnet Mask
Default Gateway
MAC Address
56
Enables "ECO Mode" to minimize power consumption in the Standby mode.
RS-232C / LAN communication cannot be used in the Standby mode.
0
If there is no signal transmission and operation for 20 minutes while an image
0
is projected, the power management switches the equipment automatically into
standby mode.
Select this option to control via RS-232C / LAN communication in the Standby
mode or if Control4 is to be used.
Obtains the IP address automatically from the DHCP server inside the connected
network.
For configuring the network settings manually.
For configuring the IP address.
For configuring the subnet mask.
For configuring the default gateway.
Displays the MAC address of the unit.
Applies the network settings.
Set to "On" to allow Control4 SDDP to detect this unit.
When this unit is not connected to an environment under the control of the controller
and Control4 SDDP from the Control4 Corporation, set this to "Off".
: Abbreviation for Dynamic Host Configuration Protocol. This is a protocol for the network
to assign an IP address automatically to the connected device.
: Numeric characters for identifying the device that is connected to the network.
: Numeric characters that define the bit count used for the network address that is a
segment of the IP address.
: Server for communicating beyond the network that is divided by the subnet mask.
: Abbreviation for Media Access Control address. This is a number that is unique to each
network adapter. Each of the network adapters is assigned with a unique MAC address.
Description
Description