Installation Style; Keystone; Anamorphic; High Altitude Mode - JVC DLA-X970R Instructions Manual

Installation Style

For setting to "Front", "Ceiling Mount (F)", "Rear", or "Ceiling Mount (R)" according to the installation status of the
projector.
"Front" or "Ceiling Mount (F)" is set when projector is installed in the front with respect to the screen.
0
"Rear" or "Ceiling Mount (R)" is set when projector is installed in the rear with respect to the screen.
0

Keystone

For correcting any keystone distortion that occurs when the projector is installed at an angle with respect to the screen.
Vertical setting range: -16 to +16
0
*1 Increasing the value changes the aspect slightly.
*2 Adjustment cannot be made during 4K 50/60p signal input.

Anamorphic

Configure this setting when an anamorphic lens is used.
Setting
A
B
Off

High Altitude Mode

Set to "On" when using the projector at a location of low atmospheric pressure (higher than 900 m (3,000 ft) above sea
level).

Screen Adjust

By selecting the optimal correction mode according to the characteristics of the screen in use, corrections can be
performed to reproduce natural images with balanced colors.
Æ "Setting Screen Correction" (P. 26)
Projects the 2.35:1 image with it stretched in the vertical direction only.
Projects the 16:9 image with it compressed in the horizontal direction only.
Projects the 2.35:1 image without any changes.
Description
51