Pixel Adjust - JVC DLA-X970R Instructions Manual

Pixel Adjust

Adjust
For setting the adjustment feature to On (Memory 1 or Memory 2) or Off.
* You can save the settings separately when an anamorphic lens is used and when you are using the projector with
a screen.
Adjust Area
Setting
Whole
Zone
Adjust Color
For selecting the color to adjust ("Red" or "Blue").
Adjust Pattern Color
For setting the color of the adjustment pattern displayed during adjustment to "White" or "Yellow / Cyan".
Adjust (Pixel)
When "Adjust Area" is set to "Whole", adjustment can be made by moving in units of one pixel on the screen of the color
selected in "Adjust Color".
Æ "Whole Adjust (Pixel) Operation Procedure" (P. 52)
Adjustment cannot be made when "Adjust Area" is set to "Zone".
0
Setting
H (Horizontal)
V (Vertical)
Adjust (Fine)
When "Adjust Area" is set to "Whole", adjustment can be made by moving in units of 1/16 pixel on the screen of the
color selected in "Adjust Color".
Æ "Whole Adjust (Fine) Operation Procedure" (P. 53)
When "Adjust Area" is set to "Zone", the screen is divided into 11 vertical x 11 horizontal zones, and fine adjustment of
each zone is possible.
Æ "Zone Adjust Operation Procedure" (P. 54)
Setting
H (Horizontal)
V (Vertical)
Reset
Restores all pixel adjustment data to the factory default.
50
Adjusts the entire image.
Enables fine adjustment of each zone by dividing the screen into 11 vertical x 11
horizontal zones.
Setting range: -2 (moves red/blue to the left) to +2 (moves red/blue to the right)
Setting range: -2 (moves red/blue downward) to +2 (moves red/blue upward)
Setting range: -31 (moves red/blue to the left) to +31 (moves red/blue to the right)
Setting range: -31 (moves red/blue downward) to +31 (moves red/blue upward)
Description
Description
Description