Oki ES6410 User Manual page 45

Power setup
ITEM
Peak Power Control
Power Save
Sleep
USB Host Power
Language setup
ITEM
Language Initialize
Print statistics
ITEM
Enter Password
Usage Report
Group Counter
SETTINGS
Normal
Low
Enable
Disable
Enable
Disable
Off
On
SETTINGS
Execute
SETTINGS
****
Enable/Disable
Enable/Disable
Menu functions > 45
EXPLANATION
Sets Peak Power Control level.
Sets Enable/Disable of Power Save Mode.
If Power Save is disabled, pressing the Power Save /
Wake Up button on the control panel will manually
override this setting.
Sets Enable/Disable of Sleep Mode.
Set power supply for USB-HOST of the whole power save
mode.
When Off, suppress power supply.
When On, do normal power supply.
EXPLANATION
Initialises the message file loaded in FLASH.
When you press the Enter button, the following
message, requesting confirmation, will appear,
Are You Sure?
Yes
No
If NO is selected, you will be returned to the source
menu.
The procedure for clearing the disk will start immediately
after the menu and rebooting.
EXPLANATION
Enters a password to enter Print Statistics menu.
The default value is "0000".
The password for entry to Print Statistics is different
from the password for entry to Functions-Admin Setup.
"Print Statistics" category is not shown when Print
Statistics function is not supported.
Enables/Disables the printing of the Usage Report.
When changing a setting value, the printer is rebooted.
Specifies if the Group counter is displayed in the Usage
Report Print.
Enable: Displayed,
Disable: Not displayed.
Conditions for display:
Enable must be selected in Print Statistics > Usage
Report.