Oki ES6410 User Manual page 32

ITEM
Print Setup Binding
(cont.)
Media Check
Resolution
Toner Save
Mode
Mono-Print
Speed
Default
Orientation
Form Length
Edit Size
Trapping
SETTINGS EXPLANATION
Long Edge Specifies Binding in duplex printing.
Short Edge Display Condition: a duplex unit is installed and enabled.
Refer to
Enable Sets whether the printer checks the matching of printed
data size and that of the tray. Only standard sizes are
Disable
checked.
600dpi Sets default resolution.
600x1200dpi
600dpi multi-
level
On/Off This function works effectively only if the data input is
color RGB data. This setting is valid in PS and PCL, but
does not take effect in the following cases.
(1) PS: If Color Matching is set OFF.
(2) PS: If any setting other than ASIC Color Matching is
set.
(3) PS: CMYK data when Ink Simulation Mode is used
(valid in any other cases except Case (1) and Case (2)
above as long as data is RGB).
(4) PCL binary data (Color/Monochrome).
Auto Sets the monochrome print speed. Prints at the most
appropriate speed for page process if Auto is set.
Color Speed
Prints always at the color print speed if Color is set.
Normal Speed
Prints always at the monochrome print speed if Normal is
set.
Portrait Specifies print orientation.
Landscape Not valid for PS (valid only for PCL/ IBMPPR/EPSONFX/
HP-GL2).
5 lines Sets the number of lines that can be printed on a page
~ Not valid for PS (valid only for PCL/HP-GL2).
64 lines Default values listed to the left are for Letter/A4. In
practice, however, they change according to the size of
~
paper loaded in the tray.
128 lines
Cassette Size/ Sets the size of an area to draw when the host PC does
A4/A5/A6/B5/ not specify the size via the paper edit size designating
Legal14/
command (Not valid for PS - only for PCL).
Legal13.5/
Legal13/Letter/
Executive/
Custom/Com-9
Envelope/Com-
10 Envelope/
Monarch
Envelope/DL
Envelope/C5/
Index Card
Off Sets trapping.
Narrow
Wide
Menu functions > 32
"Duplex" on page 31.