Setting Audio Input; Skipping Specified Inputs - Sharp LC-60LE830X Operation Manual

Useful viewing functions
Option
4:3 mode
The "WSS" signal has 4:3 auto-switching that allows you
to select between "Normal" and "Panorama".
Go to "Menu" > "Setup" > "Option" > "4:3 mode".
Normal range keeping 4:3 or 16:9 aspect
Normal
ratio.
Panorama
Wide image without side bars.
WSS signal 4:3 screen
4:3 mode "Normal"

Setting audio input

Option
Audio select
When using the PC terminal or HDMI2 terminal, you
must select which terminal uses the AUDIO IN jack for
analogue audio input.
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "Audio select".
When selecting "HDMI2" from the "INPUT" menu
When connecting devices (including a
HDMI (Digital)
PC) with a HDMI cable to the HDMI2
terminal.
When connecting devices (including a
PC) with a DVI/HDMI cable to the HDMI2
HDMI + Analog
terminal and inputting analogue audio
signals from the AUDIO IN jack.
NOTE
• You must set this to "HDMI + Analog" when connecting
devices (including a PC) with an HDMI-certified cable to the
HDMI2 terminal. If "HDMI (Digital)" is set, there will be no
sound output.
When selecting "PC" from the "INPUT" menu
When connecting devices with AV cable
Video
to the PC terminal, display images
without audio.
When connecting a PC to the PC
Video + Audio
terminal, and inputting analogue audio
signals from the AUDIO IN jack.
40
Item
4:3 mode "Panorama"
Item
Item

Skipping specified inputs

Option
Input skip
This setting allows you to skip the inputs on the input
source selection operation.
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "Input skip".