Adjusting The Pc Image Automatically; Adjusting The Pc Image Manually - Sharp LC-60LE830X Operation Manual

Connecting a PC
Adjusting the PC image
automatically
Option
Auto sync.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected with
a commercially available DVI/RGB conversion cable, etc.
1
Press # to select "PC" from the "INPUT"
menu, and then press A.
2
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "PC signal setting" > "Auto sync.".
NOTE
• When "Auto sync." is successful, "Auto Sync completed
successfully" displays. If not, "Auto sync." failed.
• Auto Sync. is likely to succeed when an input PC image has
wide vertical stripes (e.g. pattern with high contrast stripes,
or cross-hatched). It may fail when an input PC image is solid
(low contrast).
• "Auto sync." may fail even if "Auto Sync completed
successfully" displays.
• "Auto sync." may fail if the PC image has low resolution, has
unclear (black) edges, or is moved while executing "Auto
sync.".
• Be sure to connect the PC to the TV and switch it on before
starting "Auto sync.".
• "Auto sync." can be executed only when inputting analogue
signals through the PC terminal.
• This function is available for 3D images converted from 2D
images or normal 2D images.
PC compatibility chart
Resolution
VGA 640 x 480
SVGA 800 x 600
XGA 1,024 x 768
WXGA 1,360 x 768
SXGA 1,280 x 1,024
SXGA+ 1,400 x 1,050
UXGA 1,600 x 1,200
1080p 1,920 x 1,080
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA
are registered trademarks of International Business
Machines Corporation.
Ordinarily you can easily adjust the picture as necessary
to change image position using "Auto sync.". In some
cases, however, manual adjustment is needed to
optimise the image.
1
2
3
4
NOTE
• For resetting all adjustment items to the factory preset values,
• "Clock" and "Phase" in the "Fine sync." menu can be
• Images may not be displayed properly depending on the
• This function is available for 3D images converted from 2D
Horizontal Vertical
frequency frequency
31.5 kHz 60 Hz
37.9 kHz 60 Hz
48.4 kHz 60 Hz
47.7 kHz 60 Hz
64.0 kHz 60 Hz
65.3 kHz 60 Hz
75.0 kHz 60 Hz
67.5 kHz 60 Hz
NOTE
• This TV has only limited PC compatibility, correct operation

Adjusting the PC image manually

Option
Fine sync.
Press # to select "PC" from the "INPUT"
menu, and then press A.
Go to "Menu" > "Setup" > "Option" > "Terminal
setting" > "PC signal setting" > "Fine sync.".
Press a/b to select the specific adjustment item.
Press c/d to adjust the item to the desired
position.
Centres the image by moving it to the left
H-Pos.
or right.
Centres the image by moving it up or
V-Pos.
down.
Adjusts when the image flickers with
Clock
vertical stripes.
Adjusts when characters have low
Phase
contrast or when the image flickers.
press a/b to select "Reset", and then press A.
adjusted only when inputting analogue signals through the PC
terminal.
settings and/or input signals.
images or normal 2D images.
Analogue
Digital (HDMI)
(D-Sub)
✔
✔
✔
✔
✔
✔
✔
✔
can only be guaranteed if the video card conforms exactly to
the VESA 60 Hz standard. Any variations from this standard
will result in picture distortions.
Item
VESA standard
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔ ✔
✔
57