Vax U90-MXP series Instruction Manual page 5

U90-MXP Series User Guide - 04.10.qxd:User Guide
Floor/Carpet Cleaning
Move the handle and adjust it to the desired position for
(a) storing the upright, (b) operating the cleaner, and (c)
de-press the handle release pedal again to clean under
furniture. NOTE: Brushbar could cause rug fringe area to
become tangled within cleaner. Use caution when
vacuuming throw rugs with fringe.
Fig.4/4
Using the Accessories
Cleaner must be in its upright position to raise brushbar.
Turn carpet height adjuster to long carpet pile setting
(Fig.4/5).
Fig.4/5
Remove the lower hose from the base of the cleaner and
the upper hose from the hose caddy (Fig.4/6).
Fig.4/6
1/4/10 17:41
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
Any of the accessories can be directly attached to the
hose end or the end of the extension wand (Fig.4/7).
Fig.4/7
Simply push the attachment
firmly onto the end of the
extension wand. To remove
tool, twist and pull apart
gently (Fig.4/8).
TurboTool + : easily picks up
pet hair and great for
upholstery and car interiors.
Attach to hose tube or
extension tube as per all
other accessories. For best
results, use backward strokes on the surface you are
cleaning.
Stair tool: for use on stairs. Twist the head for best
contact with stair treads and risers.
IMPORTANT: Attach the stair tool to the
!
connector before fitting to the handle or
telescopic extension tube.
Carry Handle
Use the carry handle located on the top of the dirt
container lid to move the cleaner from room to room
(Fig.4/9).
Page 5
Fig.4/8
Fig.4/9
5
how to operate