Table of Contents
Advertisement
Vax VZL 101 User Guide.qxd
www.vax.co.uk
5. Dirt container & filter:
removal & replacement
WARNING: to reduce risk of injury from moving
!
parts - unplug before servicing.
Press both dirt container release buttons and remove dirt
container from cleaner (Fig.5/1).
Fig.5/1
Hold the dirt container inside rubbish bin and press the
two bin empty release buttons to release the dirt into the
bin. Press the U-shaped button first to release the fine
dust from the central dirt chamber then the smaller
button to release the rest of the dust. (fig 5/2).
Remove central dust chamber
Fig.5/2
Cleaning the pre-motor filter
Remove the dirt container lid, pull out the filter assembly
and separate the filter from it. (Fig.5/3).
Fig.5/3
6
dirt container and filter
4/10/07
09:03
Page 6
Separate the filter assembly by removing the foam filter
from its plastic housing. Tap the foam filter on the inside
of a rubbish bin to remove excess dust and dirt from filter.
Tap the filter inside a bin to shake off excess dust. The
filter can be washed under cold running water to clean it
more thoroughly. (fig 5/4)
Fig.5/4
Return foam filter to its housing and replace into dirt
container lid. (fig 5/5)".
Fig.5/5
NOTE: The filter housing also needs to be washed
regularly with cold water and dried thoroughly before
replacing and restarting the vacuum cleaner.
Cleaning the exhaust filter
Press tab on top of exhaust cover and pull cover back to
remove.
Fig.5/6
Press the two tabs at top of filter and lift off side of
cleaner (Fig.5/7).
Advertisement
Table of Contents
