Vax U90-MXP series Instruction Manual page 7

U90-MXP Series User Guide - 04.10.qxd:User Guide
Remove exhaust filter
Press tab on front of exhaust cover and lift to remove.
Fig.5/7
Press tab on exhaust filter and lift filter out of base of
cleaner (Fig.5/8).
Fig.5/8
Clean exhaust filter
Tap the exhaust filter on the inside of a rubbish bin to
remove excess dust and dirt from filter (Fig.5/9).
Fig.5/9
Wash the exhaust filter under cold running water (40° C
max) every 9 -12 months. Leave to dry for 24 hours
before replacing in machine.
Replace exhaust filter
Return exhaust filter to base of cleaner and snap into
place (Fig.5/10).
Replace exhaust filter cover and snap into place to secure
(Fig.5/11).
1/4/10 17:41
Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308
Fig.5/10
Fig.5/11
Replace dirt container
Return dirt container to cleaner. Align slot on bottom of
dirt container with tab on cleaner. Push to snap into place
(Fig.5/12).
Fig.5/12
Regular Maintenance
Each time the dirt container is emptied, the foam filter
should be checked and when necessary, cleaned (Filter
will be discoloured after use, this will not affect the
filter's performance). Do not brush the filter. The cleaning
instructions may vary depending on the dirt conditions. In
some cases, more or less cleaning of the filter may be
required.
dirt container and filter
Page 7
7