Crevice Tool; Dusting Brush; Dirt Container & Filter: Removal & Replacement - Vax V-043 Instruction Manual

Power reach bagless upright
Hide thumbs Also See for V-043:
Table of Contents

Advertisement

V043_Artwork.qxd
30/3/06
5. Accessories

Crevice Tool

Use the crevice tool for radiators, crevices, corners,
skirting boards and between cushions.

Dusting brush

Use the dusting brush on soft furnishings.
Attaching the Accessories
The crevice tool and dusting brush can be used
with or without the telescopic handle. To attach the
accessory to the hose, remove the hose from the
machine (Fig.5/1) and push the accessory onto the
end (Fig.5/2).
Fig.5/2
To use the telescopic handle, release the handle by
pushing the handle release button and attach the
hose to the top of the telescopic handle (Fig.5/3).
Attach the desired accessory to the end of the
telescope handle (Fig.5/4).
Fig.5/4
12:01
Page 6
Accessories/Dirt Container & Filter: Removal & Replacement
6. Dirt Container & Filter:
IMPORTANT: Always unplug the vacuum cleaner from
the electrical outlet before opening the dirt container.
IMPORTANT: Do NOT use the vacuum without the
HEPA filter in place.
1. To remove the dirt container, press the dirt container
release button and lift away from the vacuum
cleaner (Fig 6/1).
2. Release the bottom of the dirt container by pushing
Fig.5/1
3. Empty all the dirt from the container (Fig.6/3).
4. Remove the filter by
NOTE: The HEPA filter may
Fig.5/3
be washed by running it
under
recommend washing it once
a month or when suction
appears reduced.
Always allow to air dry for
24 hours before replacing into the vacuum.
Removal & Replacement
the button located at the back of the dirt container.
(Fig.6/2).
twisting anti-clockwise
and pulling out (Fig.6/4).
the
tap.
We
Fig.6/1
Fig.6/2
Fig.6/3
Fig.6/4
5

Advertisement

Table of Contents
loading

Table of Contents