Sackit Active 200 Earbuds And Ear Hooks; Use Sackit Active 200 Earbuds - SACKit Active 200 User Manual

SACKIT ACTIVE 200 EARBUDS AND EAR HOOKS

For the best experience of the SACKit Active 200, first find the right ear-tip size. Then you will find the
ear hook that fits your ear size best. These ear hooks are easily attached and removed (see the illustration
below on the left).
Place earbuds in the ear as shown on the illustration below on the right. Here, the inner ear support is
placed downwards in the ear. You can rotate your earbuds until you find the right position.

USE SACKIT ACTIVE 200 EARBUDS

1. First use: Take the SACKit Active 200 earbuds out of the charging case. Both earbuds flash white LED.
2. After a few seconds, one earbud will flash red/white, indicating that the two earbuds are connected
correctly in True Wireless Stereo.
3. Turn on Bluetooth on the device you want to connect
4. Select "SACKit Active 200" in the Bluetooth settings of your device. Your earbuds are now paired with
the device.
5. Start playing music on your device
6. SACKit Active 200 turns on/off automatically when removed/inserted in the charging case.
Alternatively, hold the earbud buttons for more than 10 seconds, for manual on/off.
7. SACKit Active 200 will automatically pair with the last connected device.
8. To connect to a new device make sure that the previous connected device is disconnected otherwise
connecting opportunity won't appear on the new device.
LED
BUTTON
LED
6