Gigabyte G182-C20 User Manual page 79

Parameter
XFR Enhancement
(continued)
ACS Enable
PCIe ARI Support
PCIe ARI Enumeration
PCIe Ten Bit Tag Support
HD Audio Enable
SMU Common Options
Description
VDDG Voltage Control
Š
– Options available: Auto, Manual. Default setting is Auto.
SoC/Uncore OC Mode
Š
– Forces CPU SoC/Uncore components (e.g. Infinity Fabric, memory,
and integrated graphics) to run at their maximum specified frequency
at all times. May improve performance at the expense of idle power
savings.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
LN2 Mode
Š
– Send a message to SMU to help with cold boot and operating under
LN2 conditions for GMI2.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
AER must be enabled for ACS enable to work.
Options available: Auto, Enable, Disabled. Default setting is Auto.
Enable/Disable Alternative Routing-ID Interpretation.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Enable/Disable PCIe ten bit tags for supported devices. (Auto=Disabled)
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Options available: Auto, Enabled, Disabled. Default setting is Auto.
Press [Enter] for configuration of advanced items.
cTDP Control
Š
– Selects use the fused TDP or set customized TDP. **TDP is used to
define the RC thermal model only**
– Options available: Auto, Manual. Default setting is Auto.
Fan Control
Š
– Fan Table Control
» Options available: Auto, Manual. Default setting is Auto.
EfficiencyModeEn
Š
– Options available: Auto, Enabled. Default setting is Auto.
Package Power Limit Control
Š
– Selects use the fused PPT or set customized PPT. **PPT will be used
as the ASIC power limit**
– Options available: Auto, Manual. Default setting is Auto.
APBDIS
Š
– Options available: Auto, 0, 1. Default setting is Auto.
DF Cstates
Š
– Enable/Disable DF C-states.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
CPPC
Š
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
- 39 - BIOS Setup