Table of Contents
Advertisement
Parameter
Common RAS
(continued)
Security
Phy Configuration
Description
– DRAM ECC Enable
» Enable/Disable DRAM ECC. When set to Auto, it will set ECC to
enable.
» Options available: Auto, Enabled, Disabled. Default setting is
Auto.
– DRAM UECC Retry
» Enable/Disable DRAM UECC Retry.
» Options available: Auto, Enabled, Disabled. Default setting is
Auto.
Press [Enter] for configuration of advanced items.
TSME
Š
– Enable/Disable transparent secure memory encryption.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Data Scramble
Š
– Enable/Disable Data Scrambling.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Press [Enter] for configuration of advanced items.
PMU Training
Š
– DFE Read Training
» Perform 2D Read Training with DFE on.
» Options available: Auto, Enable, Disable. Default setting is Auto.
– FFE Write Training
» Perform 2D Write Training with FFE on.
» Options available: Auto, Enable, Disable. Default setting is Auto.
– PMU Pattern Bits Control
» Options available: Auto, Manual. Default setting is Auto.
– MR6VrefDQ Control
» Options available: Auto, Manual. Default setting is Auto.
– CPU Vref Training Seed Control
» Options available: Auto, Manual. Default setting is Auto.
- 39 -
BIOS Setup
Advertisement
Table of Contents
