Installing A Memory; Dimm Population Table - Gigabyte G182-C20 User Manual

3-4-2 Installing a Memory

Before installing a memory module, make sure to turn off the computer and unplug the power
cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 DIMMs on this motherboard.
NOTE!
DIMM must be populated in order starting from A1/B1/C1/D1 socket.
Follow these instructions to install the Memory:
1. Insert the DIMM memory module vertically into the DIMM slot, and push it down.
2. Close the plastic clip at both edges of the DIMM slots to lock the DIMM module.
3. Reverse the installation steps when you want to remove the DIMM module.
2

3-4-3 DIMM Population Table

UDIMM Maximum Frequency Supported Table
DIMMs Populated
Note:
• Memory capacity 64GB/channel
• DIMM must be populated in sequential alphabetic order, starting with bank A.
• When populating DIMMs into a channel, slot numbers having the suffix "1" must be populated first, then
followed by slot numbers having the suffix "0".
1R
1
1
--
2
2
--
1
DIMM
2R XR
-- --
-- 1
-- --
1 1
- 25 -
2
Frequency (MT/s)
1.2V
3200
3200
2933
2677
System Hardware Installation