Gigabyte G182-C20 User Manual page 71

5-2-13-3-1 DDR4 Common Options
Parameter
DDR4 Common Options
DRAM Timing Configuration
DRAM Controller Configuration
CAD Bus Configuration
Description
Press [Enter] to enable / disable restrictions for DDR4 frequency and
voltage programming. Memory speeds will be capped at AMD guidelines.
Decline
Š
Accept
Š
– Overclock: Enable/Disable Memory Overclock Settings.
– Options available: Auto, Enabled. Default setting is Auto.
Press [Enter] for configuration of advanced items.
DRAM Power Options
Š
– Power Down Enable
» Enable/Disable DDR power down mode.
» Options available: Auto, Enabled, Disabled. Default setting is
Auto.
Cmd2T
Š
– Selects the Cmd2T mode on ADDR/CMD.
– Options available: Auto, 1T, 2T. Default setting is Auto.
Gear Down Mode
Š
– Enable/Disable the Gear Down Mode function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Press [Enter] for configuration of advanced items.
CAD Bus Timing User Controls
Š
– Setup time on CAD bus signals to Auto or Manual.
– Options available: Auto, Manual. Default setting is Auto.
- 39 - BIOS Setup