Table of Contents
Advertisement
Parameter
CAD Bus Configuration
(continued)
Data Bus Configuration
Common RAS
BIOS Setup
Description
CAD Bus Drive Strength User Controls
Š
– Drive Strength on CAD bus signals to Auto or Manual.
– Options available: Auto, Manual. Default setting is Auto.
Press [Enter] for configuration of advanced items.
Data Bus Configuration User Controls
Š
– Specifies the mode for drive strength to Auto or Manual.
– Options available: Auto, Manual. Default setting is Auto.
Press [Enter] for configuration of advanced items.
Data Poisoning
Š
– Enable/Disable the Data Poisoning function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
DRAM Post Package Repair
Š
– Enable/Disable the DRAM Post Package Repair function.
– Options available: Enable, Disable. Default setting is Disable.
RCD Parity
Š
– Enable/Disable the RCD Parity function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
DRAM Address Command Parity Retry
Š
– Enable/Disable the DRAM Address Command Parity Retry function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Max Parity Error Replay
Š
– Configures the Max Parity Error Replay. (0~0x3 f).
– Default setting is 8.
– Please note that this item is configurable when DRAM Address
Command Parity Retry is set to Enabled.
Write CRC Enable
Š
– Enable/Disable the Write CRC function.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
DRAM Write CRC Enable and Retry Limit
Š
– Enable/Disable DRAM Write CRC Enable and Retry Limit.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Max Write CRC Error Replay
Š
– Configures the Max Write CRC Error Replay. (0~0x3 f).
– Default setting is 8.
– Please note that this item is configurable when DRAM Write
CRC Enable and Retry Limit is set to Enabled.
Disable Memory Error Injection
Š
– Options available: False, True. Default setting is True.
ECC Configuration
Š
– DRAM ECC Symbol Size
» Configures the DRAM ECC Symbol Size.
» Options available: Auto, x4, x8. Default setting is Auto.
- 72 -
Advertisement
Table of Contents
