Pci Subsystem Settings - Gigabyte G182-C20 User Manual

5-2-7 PCI Subsystem Settings

Parameter
PCI Bus Driver Version
SATA Hot Plug
NVMe RAID mode
SL_SAS_1/2 Control
PCIE_#
(Note1)
PCIE_# I/O ROM
(Note1)
Onboard LAN Controller
Onboard LAN1/2 I/O ROM
(Note1) This section is dependent on the available PCIe Slot.
(Note2) This section is dependent on the available LAN controller.
BIOS Setup
Description
Displays the PCI Bus Driver version information.
Enable/Disable SATA Hot Plug.
Options available: Enabled, Disabled. Default setting is Disabled.
Enable/Disable NVMe RAID mode.
Options available: Enabled, Disabled. Default setting is Disabled.
Change the SL_SAS function.
Options available: Disabled, SATA, PCIe x4. Default setting is PCIe x4.
Change the PCIe lanes.
Options available: Disabled, Enabled, x4x4, x8x8, x8x4x4, x4x4x8,
x4x4x4x4. Default setting is Enabled.
When enabled, this setting will initialize the device expansion ROM for
the related PCI-E slot.
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN controller.
(Note2)
Options available: Enabled, Disabled. Default setting is Enabled.
Enable/Disable the onboard LAN devices, and initializes device
expansion ROM.
(Note2)
Options available: Enabled, Disabled. Default setting is Enabled.
- 56 -