Table of Contents
Advertisement
Available languages
Available languages
GB
Read installation and operating instructions care-
fully before installing the derivative temperature
control set
The installation and operating instructions as well
as all other valid documents have to remain with
the user of the system
Content:
1. General information .......................................... 5
2. Safety notes...................................................... 5
3. Transport, packaging and storage ................... 6
4. Technical data................................................... 6
5. Construction and function................................ 6
6. Installation......................................................... 6
7. Operation .......................................................... 8
8. Maintenance ..................................................... 8
9. Warranty............................................................ 8
Illustr.1 Derivative temperature control set
1. General information
1.1. Information regarding installation and opera -
ting instructions
These installation and operating instructions serve the
installer to install the derivative temperature control
set professionally and to set it into operation.
Other valid documents:
Manuals of all system components as well as valid
standards, regulations and safety regulations.
1.2. Keeping of documents
These installation and operating instructions should
be kept by the user of the system.
For an overview of our global presence visit
www.oventrop.com.
Subject to technical modifications.
134109080 03/2013
Derivative temperature control set
for dwelling station "Regudis W-HTU"
Installation and operating instructions for the specialised installer
1.3. Symbol explanation
Safety guidelines are displayed by symbols. The guide-
lines are to be observed to prevent accidents, damage
to property and malfunctions.
nent dangerous situation which will lead to death or
serious injury if the safety guidelines are not obser-
ved.
possible damage to property which may occur if the
safety guidelines are not observed.
1.4. Copyright
The installation and operating instructions are copy-
righted.
2. Safety notes
2.1. Correct use
Operating safety is only guaranteed if the derivative
temperature control set is used correctly.
The derivative temperature control set is designed for
the installation in the "Regudis W-HTU" dwelling sta-
tion.
Any use of the derivative temperature control set out-
side the above circumstances will be considered as
non-compliant and misuse.
Claims of any kind against the manufacturer and/or
its authorised representatives due to damages caused
by incorrect use cannot be accepted.
The observance of the installation and operating in-
structions is part of the compliance terms.
2.2. Possible dangers at the installation location
Hot surfaces
The piping of the derivative temperature control
set as well as all components of the dwelling
station "Regudis W-HTU" can get very hot dur-
ing operation. Do not touch without safety
gloves.
The case of an external fire has not been taken into
consideration during the design of the derivative tem-
perature control set.
Valves, controls + systems
DANGER
DANGER indicates an immi-
ATTENTION
ATTENTION indicates a
DANGER
5
Advertisement
Table of Contents
