Advertisement
Getting Started
The Alloy SmartHome Hub works best if installed
in a central location to where your smart devices
will be connected. Maintain a minimum separation
distance of 7.6 inches (20 cm) between this equipment
and any person or other devices. To install:
1. Mount a 5.5 inch (14 cm) DIN rail to a wall in the desired location and slide the hub onto it.
2. Connect the supplied power adapter.
3. When the status LED turns solid green, the hub is available for use.
Important Safety Instructions
•
Read, follow, and keep these instructions.
•
Heed all warnings.
•
Do not use this product near water or expose the product to dripping or
splashing of any water or liquid.
•
Clean only with a dry cloth.
•
Do not install near any heat sources such as radiators, heat registers, stoves or
other apparatus (including amplifiers) that produce heat.
•
Only use attachments and accessories specified by the manufacturer.
Advertisement
Table of Contents
Related Manuals for Alloy SmartHome AH-HUB3
Summary of Contents for Alloy SmartHome AH-HUB3
- Page 1 Getting Started The Alloy SmartHome Hub works best if installed in a central location to where your smart devices will be connected. Maintain a minimum separation distance of 7.6 inches (20 cm) between this equipment and any person or other devices. To install: 1.
- Page 2 Certifications FCC Statement Model: AH-HUB3 This device complies with Part 15 of the FCC rules. Certified under FCC Part 15 Operation is subject to the following two FCC ID: 2AXMUAHH3ZW conditions: 1. This device may not cause harmful interference 2. This device must accept any interference Information To The User received, including interference that may cause undesired operation.
Need help?
Do you have a question about the SmartHome AH-HUB3 and is the answer not in the manual?
Questions and answers